Phone too far away? Control your Grid Connect lights with the Grid Connect Remote instead!
With the Grid Connect Remote (RMO370HA), we kept the convenience of smart home control, but removed the inconvenience of always needing your phone on hand.
Already have a Grid Connect Remote? See the list of compatible Grid Connect lights below!
Light up your home
With just 2 AAA batteries, the Grid Connect Remote can connect up to 10 compatible Grid Connect lights within range, and control:
- On/Off
- Brightness
- RGB (where applicable)
- White (Warm-Cool) (where applicable)
+
+
+
No phone? No worries!
Stick it anywhere with the included mounting plate.
Compatible Grid Connect Lights
Below is a list of all Grid Connect Lights that support the Grid Connect Remote, new products will be added as we go:
- All Grid Connect Matter Globes are supported! see our range here: Matter Compatible Range.
- All other Grid Connect Lights listed below must have firmware version [1.6.3] installed to be compatible. Find out how to update your device’s firmware by looking through the ‘Firmware Update’ option on the Accessing Device Information app guide.
Setting up your remote
Raring to go? Here's how to set up your Grid Connect Remote:
Prepare your Grid Connect lights
- Check that your lights are compatible with the Grid Connect Remote.
- Pair your Grid Connect lights to the Grid Connect app.
- Ensure that the Grid Connect lights' firmware is up to date. Find out how
Linking your Grid Connect Remote to your Grid Connect lights
- Open the housing on the Grid Connect Remote with an appropriate tool.
- If not already, install 2x AAA batteries and keep the housing open.
- Power off your Grid Connect lights from the switch and then back on again.
- Within 30 seconds of the lights turning on, place the Grid Connect Remote within 10cm of the Grid Connect light, and short press the middle button on the remote.
- The lights will flash when paired successfully. Repeat steps 3 to 5 if not.
You can pair and control up to 10 lights at the same time. If some lights do not pair on the first attempt, try these steps again, but keep the successfully pairing lights powered off. Once all lights are paired, power on all lights again.
You can unlink your Grid Connect remote from your Grid Connect lights by long pressing the middle button until the indicator light on the remote begins flashing.
Need help?
Visit our Support Page, with access to FAQs, App Guides and more.
