Have an action automatically take place when certain conditions are met, like your heater automatically turning on when the weather gets cold or your lights turning on when it starts getting dark.
Have actions automatically take place when certain conditions are met.
This could be based on weather, time of day, specific scheduling or device changes, such as sensor.- To access automation, tap the menu icon.
- Tap 'Scenes and Automation' and then select '+'.
- Choose a condition from the menu (anything but tap-to-trigger).
- You can set up to 10 conditions and select whether any or all of the conditions must be met to activate the automation.
- Select 'run the device' and then find the device you want to activate. The options available depend on the individual products’ functionality.
- Follow the on-screen prompts until you get to the 'setup your scene' page. From here you can choose to add more actions by tapping the + icon beside action.
- Adjust the 'activate period' if you don’t want the automation occurring all the time. This can be used so that an automation only happens at certain times (such as after dark) or particular days of the week (such as your work days).
- Tap 'save' to finish your automation.
- You can disable the automation, without deleting it, by swiping the toggle switch. This is useful if you go on holiday and don’t need your usual automations.
Not sure what each of the options mean?
Check the list below for more info on what you can do with an automation. Each automation can have up to 150 things happen! That is a lot of possibilities… Not sure how to create an automation to do what you’d like? Contact our customer service team who can help you, step-by-step, create any automation.
This is the option you select if you’d like to create a scene. A scene is where you can have different products do different things. You can activate a scene by using either the shortcut button in the app or voice control.
Select this option to use the following as triggers for an automation:
1. Temperature – based on Bureau of Meteorology data for your location
2. Humidity – based on Bureau of Meteorology data
3. Weather – sunny/cloudy/rainy/snowy/haze etc. from BoM
4. Sunrise/sunset – based on your location
5. Windspeed – from the Bureau of Meteorology
Want to have a Grid Connect environmental sensor trigger your products at a particular temperature or humidity reading? Select ‘when device status changes’ and then find your environmental sensor in the device list.
This uses the location of your phone to trigger devices depending on when you arrive or leave a preset location. You can adjust the radius to be more or less sensitive to suit.
This uses the time to trigger your devices. You can set it to happen as a once-off, every day, or only on certain days. Want to have more than one time trigger your device actions? You can set multiple conditions (each with a different time) to save you from having to create a new automation for each time.
This is the most common automation selection. This is where a Grid Connect product (or products) can trigger other devices. If you want to use a motion, contact, or environmental sensor to trigger your products, this is the option to choose.
How to turn on a light at sunset
Follow along with this automation setup example to see how to set a light to turn on 30 minutes before sunset. Create another automation to have them turn off at sunrise. For this automation, all you need is a Grid Connect lighting product, or you could use a lamp and a non-smart globe that you already have plugged into a single adaptor or power board.
